Reliable Cameras from a Reliable Technican! Up For Sale Is A. Vintage Original Yashica Mat-124 G Camera in. [Good As New] MINT Working Condition!With All perishable or Worn-out Parts changed to work "Like New". = Stands for Cleaning out expired, congealed greases/Lubes from [every] single internal part of Mechanical Mechanisms with moving. Parts (Focusing, Film Advance and Shutter). Stands for Lubing (Re-lubricating) all internal parts with various types of lubricants. Stands for necessary re-adjusting of all internal mechanical mechanisms on re-assembly. CLA Applies ONLY to Overhaul of Internal Mechanical Mechanisms! Installing Foam Light Seals or Cleaning/Replacing Optical Parts is NOT a CLA Service! Anyone can be shown to change a light seal or change optical parts, Not Everyone can perform a True CLA Service that takes many hours, special tools and much training. Look further down to see photos of a True CLA.
Ask other Sellers if they performed a True CLA. Date/Time Stamped Photo Proof Required within 24 Hrs.
Custom Covered in Beautiful Two-Tone Speckled Emerald Green Strong-Grip Leatherette. Ready to Use out of the Box, in a Mint Working and an Excellent Cosmetic Condition!Also Makes a Great Gift! POSTED IMAGES ARE OF THE ACTUAL ITEM. I operate the most complete restoration Studio in the U. You can ask me any questions, get accurate answers, help and guidance.
Camera in perfect condition, serviced by an expert! He goes above and beyond. "Great service from the best Y-Mat tech in the business - AAA+++".
This item is in excellent condition. Beautiful camera & condition, Bob is extremely helpful & knowledgeable. One of the best service I have received.Bob is very patient and helpful. Product As Described-Rxcellent Service- Thanks! MORE ABOUT THE CAMERA ON SALE.
A Vintage Original Yashica Mat-124 G Camera Set in MINT Working Condition - Body SERIAL# 7055840. [Like a New Camera]>. Mint Mechanical and Beautiful Cosmetic Condition! It Has been professionally Cleaned, Lubed, Adjusted (CLA)- NEW Light Seals are Installed inside Film Housing Door and between light meter and the viewfinder. Newly Custom Installed Two-tone Speckled Emerald Green Strong-Grip Leatherette.
Dismantling and cleaning each of the 4 elements in the bottom "taking Lens" as well as those in the top "viewing Lens", the shutter/aperture blades & mechanisms, the viewfinder glass and Internal reflex focusing mirror, light meter and battery terminal contacts, the film chamber and all external parts, controls and leatherette covers. Dismantling focusing, film advance and film door mechanisms (involving many screws, gears, Springs, levers, linkages, cams and bellows) to clean out old expired/hardened greases/lubes/dirt, and replace all necessary greases and lubes for a smooth, like new operation. Any required adjustments to the shutter mechanisms(speed, f-stop, self-timer, release button response)- adjustments to Focusing cams, springs, and bellows arms that go out of adjustment over the years and govern correct operation of the focusing system- Adjustments to levers, springs and linkages that connect the film advance side to the shutter system, and govern proper operations of film advance and cocking and release of the shutter. Every function and all adjustment controls on the Camera have been just tested and all work properly. "All Work Smoothly Like Butter" As if the Camera was just manufactured!
This Camera in a MINT Working Condition! Its is ready to use out of the box for your enjoyment.
THIS IS WHAT A TRUE & COMPLETE CLA PROCESS LOOKS LIKE! The Camera Must be Dismantled Down to the Bare Frame! All Perishable or Worn-out Parts Are Changed out to Work "Like New"! Because, that would be a real Full CLA and they often do not mean that! Take a Look at these Sample Service Photos Below and See Why Every 30+ Yrs.
Be Aware of Cheap Auctions Offering 30+ Yrs. Here Are Some Important "Must Know" Facts. 2- 99.9% of these very old cameras have never been opened or professionally CLA Serviced (Clean, Lube, Adjust) ever since they were first made.
3- These old cameras may all look great on the out-side, but these vintage manual cameras all have congealed, expired greases & lubes inside the shutter, focus and film advance mechanisms, brittle and nonworking light seals, many soft-metal parts and springs inside various mechanisms that need an adjustment (tune-up) or even replacement, rusty or corroded internal electrical wiring or contacts, grimy or de-silvered internal focusing reflex mirrors, dirty 4-element taking and focusing lenses, all as a result of time and having been stored away for many years where often they are exposed to either humidity, too much cold or heat. As a technician, I see the above conditions in cameras that look brand new on the outside- but many of these conditions will happen to cameras that have either been lightly used or never used from 30+ years ago. You would not expect to store-away an automobile for 30+ years and then have it start right-up and continue to run smoothly without first being professionally serviced Vintage mechanical cameras work the same way and have perishable lubes, seals and parts that need to be professionally changed, cleaned and adjusted after many years of being stored-away, unused and often never serviced from the date when first manufactured!
Therefore they usually misrepresent the outside conditions of the camera for the true "working condition" of the camera equipment by using. Misleading words like "Seems or looks to be working" or " Looks or Appears to be in great condition" or "A friend or family member said it worked" and other similar uncertain language. Detailed List Of Most Common Issues With 30+ Yrs.
In the film bay and around the light metering system, which are made from high-density foam are All dried-up and compressed, no longer protecting against unwanted light exposure to film and light meter. B- The rear 3rd taking lens element. Hidden behind the shutter blades are Not Crystal Clear and almost always spotted or fogged or hazed with dried oily film (looks like fine dust or moisture) from the shutter blades, and which often permanently etches/damages the surface of the 3rd lens element beyond repair or cleaning. In addition, many of these rear lens elements can sometimes also show a form of lens fungus due to prolonged storage in hot and cold areas (basements & attics) where condensation and moisture create fungus and mold over the years.
Haze, Fog, Spots, fungus cannot be seen or recognized from the outside of the camera! There is an internal test that involves several steps in order to verify true condition of the lens elements that are behind the shutter blades.
C- Sticky shutters, locked-up aperture. Or shutter blades or Stiff shutter speed/aperture adjuster knobs- In many cases the shutter does not fire correctly each time or at the right selected speed, or certain shutter speeds or aperture openings will not be selectable and locked-up. D- Locked-up, sticky or Broken-off Shutter self-timer. Levers (below the Bottom lens) because someone, at some point operated the timer lever before making sure that the "Flash Sync lever" (left side of the lenses) was set correctly and in Yashica TLR's that will break the shutter and the shutter timer lever function! E- Corroded or rusted battery terminal wiring or contact.F- Gritty and stiff focusing knob and film advance. Lever because old internal lubricants become dry and gunky after 40+ years. These parts should move as smooth as butter and the camera needs a professional overhaul and CLA to remove and replace old lubricants. Operating the camera with old lubricants will wear the camera parts instead of protecting them. This is Not a Camera with an unknown background or condition like those from an Estate Sale, Yard Sale, or from someone's Attic or Basement!
Every single function and feature has been professionally tested and is functioning properly. This Camera Has Been Professionally and Completely Overhauled and Tested by a Yashica Technician! Yashica Mat-124 G Camera, in 2-Tone Emerald Green Serial# 7055840. You will not be sent a damaged or non-working item unless otherwise listed. All items were tested when pulled and or prior to shiiping to make sure the item is in working order.
Every item is accurately pictured. Stock photos are not used unless otherwise stated. Electronic/Computer type items are not returnable. If you are unsure of anything, or need additional information. No expense is spared in packing your items properly and securely.
Safe packing is one of my best talents. Local pick-ups are not available!The claim process usually takes from 2 to 6 weeks and varies by Carrier. Digital photos must be provided to verify your claim for a return. Date and time when each photo was taken Must be digitally printed on each Photo! There are No Exceptions on this requirement! As long as my buyers act within those terms and conditions, I will do my best to resolve any issues.
I will leave you a feedback as soon as I receive one from you when you have received your item. To View My Other Listings. Please check back weekly to see my New Listings.The item "Yashica Mat 124G Camera Full CLA Service by Yashica Tech with6 Mo. Warranty-EG MINT" is in sale since Sunday, September 22, 2019. This item is in the category "Cameras & Photo\Film Photography\Film Cameras".
The seller is "cla_studios" and is located in Orlando, Florida. This item can be shipped worldwide.